IBM 8671 Hardware Maintenance Manual - Page 65
Removing, server, left-side, cover, bezel, tower, model
![]() |
UPC - 087944734307
View all IBM 8671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing the server left-side cover and bezel (tower model) This section describes how to remove the left-side cover and bezel from the tower model server. Removing the left-side cover The following illustration shows how to remove the left-side cover from the tower model server. Left-side cover Coverrelease latch Complete the following steps to remove the server left-side cover: 1. Review the information in "Installation guidelines" on page 45, "Handling static-sensitive devices" on page 46, and "Safety information" on page 169. 2. Push the plastic cover-release latch on the front of the server to the right to release the cover. 3. While pushing the plastic cover-release latch, slide the left-side cover slightly toward the rear of the server; the cover will stop after approximately 25 mm (1 inch). Release the cover-release latch; then, lift the cover off the server and set the cover aside. Chapter 4. Customer replaceable units 55
![](/manual_guide/products/ibm-8671-hardware-maintenance-manual-61e0001/65.png)