IBM 8671 Hardware Maintenance Manual - Page 70
Working, adapters, Adapter, considerations
![]() |
UPC - 087944734307
View all IBM 8671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
b. Slide the adapter-support bracket and fan-support bracket unit out of the guides; then, remove it from the server. Note: To reinstall the adapter-support bracket and other components that you removed or disconnected, reverse the preceding steps. Remember to reroute the cables that you disconnected and to reconnect the center-fan cable to the system board (see "System-board internal cable connectors" on page 49). 8. Continue with the option installation or removal procedure. Working with adapters This section describes how to install hot-plug and non-hot-plug PCI and PCI-X adapters. Before you continue with the adapter-installation procedures, review "Adapter considerations." The following illustration shows the location of the PCI and PCI-X adapter expansion slots on the system board. Slots 5 and 6 are the Active PCI-X slots. Active PCI-X slots are also called hot-plug PCI-X slots. Note: For information about the adapter power-on and attention LEDs, see "LEDs for Active PCI slots" on page 36. PCI slot 1 32-bit 5.0 V (J32) PCI-X slot 2 64-bit 3.3 V (J36) PCI-X slot 3 64-bit 3.3 V (J38) PCI-X slot 4 64-bit 3.3 V (J41) PCI-X slot 5 64-bit 3.3V 133 MHz hot-plug (J43) PCI-X slot 6 64-bit 3.3 V 133 MHz hot-plug (J45) Adapter considerations Before you install an adapter, review the following: v Read the documentation that comes with your operating system. 60 xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-8671-hardware-maintenance-manual-61e0001/70.png)