IBM x3400 User Guide - Page 54

static-protective

Get IBM x3400 - System - 7975 PDF manuals and user guides View all IBM x3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

EMC shields Tape drive 7. Rotate the power-supply cage assembly out of the chassis: v Hot-swap models: a. Remove the hot-swap power-supply. Press down on the orange release lever and pull the power supply out of the bay, using the handle. b. Lift up the power-supply cage handle and pull the power-supply cage assembly all the way up until the retainer latch locks the cage in place on the chassis. v Non-hot-swap models, lift up the power-supply cage handle and pull the power-supply cage assembly all the way up until the retainer latch locks the cage in place on the chassis. 8. Press in on the front fan cage assembly release buttons on the sides of the chassis to release the fan cage assembly from the connector on the chassis. Lift the fan cage assembly up and out of the chassis and set it aside. 9. Touch the static-protective package that contains the tape drive to any unpainted metal surface on the server; then, remove the tape drive from the package and place it on a static-protective surface. 10. Slide the tape drive into the server from the front of the drive cage, then connect the IDE cable to the tape drive. 11. Secure the tape drive to the chassis with the supplied screws. 12. Connect the tape drive cable to the tape drive connector on the system board. 13. Reinstall the front fan cage assembly. Align the front fan cage assembly over the fan cage assembly slot and with the connector on the system board. Lower the fan cage assembly into the chassis and press down firmly until the fan cage assembly is seated firmly in place. 14. Rotate the power-supply cage assembly back into the server. Press the power-supply cage release tab and rotate the power-supply cage assembly into the chassis. 15. If you have a hot-swap model, reinstall the hot-swap power-supplies. If you have other options to install or remove, do so now; otherwise go to "Completing the installation" on page 68. 40 System x3400 Types 7973, 7974, 7975, and 7976: User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
Tape drive
EMC shields
7.
Rotate
the
power-supply
cage
assembly
out
of
the
chassis:
v
Hot-swap
models:
a.
Remove
the
hot-swap
power-supply.
Press
down
on
the
orange
release
lever
and
pull
the
power
supply
out
of
the
bay,
using
the
handle.
b.
Lift
up
the
power-supply
cage
handle
and
pull
the
power-supply
cage
assembly
all
the
way
up
until
the
retainer
latch
locks
the
cage
in
place
on
the
chassis.
v
Non-hot-swap
models,
lift
up
the
power-supply
cage
handle
and
pull
the
power-supply
cage
assembly
all
the
way
up
until
the
retainer
latch
locks
the
cage
in
place
on
the
chassis.
8.
Press
in
on
the
front
fan
cage
assembly
release
buttons
on
the
sides
of
the
chassis
to
release
the
fan
cage
assembly
from
the
connector
on
the
chassis.
Lift
the
fan
cage
assembly
up
and
out
of
the
chassis
and
set
it
aside.
9.
Touch
the
static-protective
package
that
contains
the
tape
drive
to
any
unpainted
metal
surface
on
the
server;
then,
remove
the
tape
drive
from
the
package
and
place
it
on
a
static-protective
surface.
10.
Slide
the
tape
drive
into
the
server
from
the
front
of
the
drive
cage,
then
connect
the
IDE
cable
to
the
tape
drive.
11.
Secure
the
tape
drive
to
the
chassis
with
the
supplied
screws.
12.
Connect
the
tape
drive
cable
to
the
tape
drive
connector
on
the
system
board.
13.
Reinstall
the
front
fan
cage
assembly.
Align
the
front
fan
cage
assembly
over
the
fan
cage
assembly
slot
and
with
the
connector
on
the
system
board.
Lower
the
fan
cage
assembly
into
the
chassis
and
press
down
firmly
until
the
fan
cage
assembly
is
seated
firmly
in
place.
14.
Rotate
the
power-supply
cage
assembly
back
into
the
server.
Press
the
power-supply
cage
release
tab
and
rotate
the
power-supply
cage
assembly
into
the
chassis.
15.
If
you
have
a
hot-swap
model,
reinstall
the
hot-swap
power-supplies.
If
you
have
other
options
to
install
or
remove,
do
so
now;
otherwise
go
to
“Completing
the
installation”
on
page
68.
40
System
x3400
Types
7973,
7974,
7975,
and
7976:
User’s
Guide