IBM x3400 User Guide - Page 89
Configuring, server - raid configuration
View all IBM x3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 3. Configuring the server The following configuration programs and utilities come with the server: v Configuration/Setup Utility program The Configuration/Setup Utility program is part of the basic input/output system (BIOS) code. Use it to configure serial port assignments, change interrupt request (IRQ) settings, change the startup-device sequence, set the date and time, and set passwords. For information about using this utility program, see "Using the Configuration/Setup Utility program" on page 76. v IBM ServerGuide Setup and Installation CD The ServerGuide program provides software-setup tools and installation tools that are designed for the server. Use this CD during the installation of the server to configure basic hardware features, such as an integrated SATA controller with RAID capabilities, and to simplify the installation of the operating system. For information about using this CD, see "Using the ServerGuide Setup and Installation CD" on page 81. v Boot Menu program The Boot Menu program is part of the BIOS code. Use it to override the startup sequence that is set in the Configuration/Setup Utility program and temporarily assign a device to be first in the startup sequence. v Broadcom Gigabit Ethernet Utility program The Broadcom Gigabit Ethernet Utility program is part of the BIOS code. You can use it to configure the network as a startable device, and you can customize where the network startup option appears in your startup sequence. Enable the Broadcom Gigabit Ethernet Utility from the Configuration/Setup Utility program. For information, see "Enabling the Broadcom Gigabit Ethernet Utility program" on page 83. v Ethernet controller configuration For information about configuring the Ethernet controller, see "Configuring the Broadcom Gigabit Ethernet controller" on page 83. v IBM Director IBM Director is a workgroup-hardware-management tool that you can use to centrally manage servers. If you plan to use IBM Director to manage the server, you must check for the latest applicable IBM Director updates and interim fixes. For information about updating IBM Director, see "Updating IBM Director" on page 84. For more information about IBM Director, see the IBM Director documentation on the IBM Director CD. v RAID configuration programs - IBM ServeRAID Configuration Utility program Use the IBM ServeRAID Configuration Utility program to configure devices that are attached to the onboard SAS/SATA controller. For information about using this program, see "Configuring hot-swap SAS, hot-swap SATA, or Simple-swap SATA (some models) RAID" on page 85. - Adaptec® RAID (HostRAID™) Configuration Utility program Use the Adaptec RAID Configuration Utility program to configure the integrated SATA controller with integrated RAID and the devices that are attached to it. For more information about using this utility program, see "Configuring simple-swap SATA RAID" on page 87. - ServeRAID Manager © Copyright IBM Corp. 2008 75