IBM x3400 User Guide - Page 95
Using, ServerGuide, Setup, Installation, features - raid driver
View all IBM x3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
up to seven characters (A-Z, a-z, and 0-9) for the password. The Administrator Password choice is on the Configuration/Setup Utility menu only if an optional IBM Remote Supervisor Adapter II SlimLine is installed. Resetting passwords If you forget the power-on password or administrator password, you can change the switch position of the clear CMOS switch (SW4) on the system board to bypass the power-on password and administrator password check. This enables you to reset the power-on password and administrator password. Using the ServerGuide Setup and Installation CD The ServerGuide Setup and Installation CD contains a setup and installation program that is designed for your server. The ServerGuide program detects the server model and hardware options that are installed and uses that information during setup to configure the hardware. The ServerGuide program simplifies operating-system installations by providing updated device drivers and, in some cases, installing them automatically. You can download a free image of the ServerGuide Setup and Installation CD, or you can purchase the CD. To download the image, go to the IBM ServerGuide Web page at http://www.ibm.com/pc/qtechinfo/MIGR-4ZKPPT.html. To purchase the latest ServerGuide Setup and Installation CD, go to the ServerGuide fulfillment Web site at http://www.ibm.com/servers/eserver/xseries/systems_management/sys_migration/ serverguide/sub.html. The ServerGuide program has the following features: v An easy-to-use interface v Diskette-free setup, and configuration programs that are based on detected hardware v ServeRAID Manager program, which configures your ServeRAID adapter or integrated SAS or SATA controller with RAID capabilities v Device drivers that are provided for the server model and detected hardware v File-system type that is selectable during setup ServerGuide features Features and functions can vary slightly with different versions of the ServerGuide program. To learn more about the version that you have, start the ServerGuide Setup and Installation CD and view the online overview. Not all features are supported on all server models. The ServerGuide program requires a supported IBM server with an enabled startable (bootable) CD or DVD drive. In addition to the ServerGuide Setup and Installation CD, you must have the operating-system CD to install the operating system. The ServerGuide program performs the following tasks: v Sets system date and time v Detects an installed RAID adapter or controller and runs the RAID configuration program v Checks the microcode (firmware) levels of a ServeRAID adapter and determines whether a later level is available from the CD v Detects installed hardware options and provides updated device drivers for most adapters and devices Chapter 3. Configuring the server 81