IBM x3500 Installation Guide - Page 44
Completing, installation
UPC - 883436005760
View all IBM x3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Remote Supervisor II SlimLine adapter Remote Supervisor II SlimLine adapter retainer clip Remote Supervisor II SlimLine adapter support bracket 6. Carefully grasp the Remote Supervisor Adapter II SlimLine by its top edge or upper corners, and align it with the Remote Supervisor Adapter II SlimLine guide and the connector on the system board. Attention: Incomplete insertion might cause damage to the system board or the adapter. 7. Press the Remote Supervisor Adapter II SlimLine firmly into the connector and under the retention clip on the Remote Supervisor Adapter II SlimLine support bracket. 8. Close the rear adapter retention bracket. If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation." Completing the installation To complete the installation, complete the following steps: 1. Install the bezel: a. Align the tabs on the left-side of the bezel with the slots on the server chassis. b. Insert the tabs into the slots and close the bezel. 2. Install the left-side cover. 30 IBM System x3500 Type 7977: Installation Guide