IBM x3500 Installation Guide - Page 87
Error - 1807 error
UPC - 883436005760
View all IBM x3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the Problem Determination and Service Guide on the IBM System x Documentation CD to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 1804 No more memory (below 1 MB for a PCI adapter). 1. Remove the failing adapter 2. Reseat each adapter 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Each adapter b. (Trained service technician only) PCI-X board 1805 PCI option ROM checksum error. 1. Make sure that the settings for the adapter and all other adapters in the Configuration/Setup Utility program are correct. 2. If the error code indicates a particular PCI or PCI-X slot or device, remove that device. 3. Reseat each adapter 4. Replace the following components one at a time, in the order shown, restarting the server each time: a. Each adapter b. (Trained service technician only) PCI-X board 1806 PCI built-in self-test failure. 1. Make sure that the settings for the adapter and all other adapters in the Configuration/Setup Utility program are correct. 2. If the error code indicates a particular PCI or PCI-X slot or device, remove that device. 3. Reseat each adapter 4. Replace the following components one at a time, in the order shown, restarting the server each time: a. Each adapter b. (Trained service technician only) PCI-X board 1807, 1808 General PCI error. 1. Make sure that no devices have been disabled in the Configuration/Setup Utility program. 2. Reseat the failing adapter. Note: If an error LED is lit for a specific adapter, reseat that adapter first; if no LEDs are lit, reseat each adapter one at a time, restarting the server each time, to isolate the failing adapter. 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Each adapter b. (Trained service technician only) PCI-X board Chapter 5. Solving problems 73