Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 120
Settings Main Menu or Con tab web gt; System Settings >, Manage I/O
View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 5 - Troubleshoot the Printer Problems and Possible Solutions (Continued) Problem Possible Solution The ribbon breaks. Try these possible solutions in order: • Make sure your media setting is appropriate for the type of media you are using. • Make sure that the ribbon is fitted correctly. Reload the ribbon. • The energy control may be faulty. For help, contact your Intermec Service representative. The Ethernet or wireless network Try these possible solutions: connection is not working correctly. • Make sure your network cable is securely connected to your printer and a straight "pin-to-pin" cable, not a "crossover" cable. • Make sure your PC is correctly configured for and connected to your network. • Make sure your printer is correctly configured for your network. I cannot connect to the printer web page. If you are connecting your printer with a crossover network cable, you may need to disable the web browser's proxy settings on your computer to access the printer web page. The printer has RFID media After you load RFID media, restart the loaded, but it is not writing to the printer to let the printer identify the tags. RFID media type or run the RFID calibration wizard. The RFID module is installed in The printer is not communicating the printer, but "RFID" does not properly with the RFID hardware. For appear in the menu. help, contact your local Intermec representative. None of the RFID commands work. RFID is disabled. Enable RFID from the web page or the Main Menu. Go to Settings (Main Menu) or Configure tab (web page) > System Settings > Manage I/O. 106 PC23 and PC43 Desktop Printer User Manual