Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 165

Serial Port Settings

Get Intermec PC43d PDF manuals and user guides View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals

Page 165 highlights

Appendix B - Default Settings Serial Port Settings This section describes the serial port settings. To view these settings: • From the printer Main Menu, select Settings > Communications > Serial > COM1. • From the printer web page, click the Configure tab, Communications > Serial. Note: These settings are not accessible unless the printer has a serial connection to a PC. Serial Port Settings Setting Baud Rate Data Bits Parity Stop Bits Hardware ENQ/ACK XON/XOFF To XON/XOFF From Description Default Transmission speed in bits per second (bps) for the serial port. 115200 Number of bits that define a character or 8 byte. Specifies how the printer checks the integrity of the transmitted data. None Number of bits sent at the end of every 1 character to allow the receiving signal hardware to detect the end of a character and to resynchronize with the character stream. Specifies if hardware flow control Disable (RTS/CTS) is used to manage the rate of data transmission between the device and the host. Specifies if software flow control Disable (ENQ/ACK) is used to manage the rate of data transmission between the device and the host. Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission to the host. Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission from the host. PC23 and PC43 Desktop Printer User Manual 151

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
Appendix B — Default Settings
PC23 and PC43 Desktop Printer User Manual
151
Serial Port Settings
This section describes the serial port settings. To view these settings:
•
From the printer Main Menu, select
Settings > Communications
> Serial > COM1
.
•
From the printer web page, click the
Configure
tab,
Communications
> Serial
.
Note:
These settings are not accessible unless the printer has a serial
connection to a PC.
Serial Port Settings
Setting
Description
Default
Baud Rate
Transmission speed in bits per second
(bps) for the serial port.
115200
Data Bits
Number of bits that define a character or
byte.
8
Parity
Specifies how the printer checks the
integrity of the transmitted data.
None
Stop Bits
Number of bits sent at the end of every
character to allow the receiving signal
hardware to detect the end of a character
and to resynchronize with the character
stream.
1
Hardware
Specifies if hardware flow control
(RTS/CTS) is used to manage the rate of
data transmission between the device and
the host.
Disable
ENQ/ACK
Specifies if software flow control
(ENQ/ACK) is used to manage the rate of
data transmission between the device and
the host.
Disable
XON/XOFF To
Specifies if software flow control
(XON/XOFF) is used to manage the rate of
data transmission to the host.
Disable
XON/XOFF From
Specifies if software flow control
(XON/XOFF) is used to manage the rate of
data transmission from the host.
Disable