Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 57
Load Media for Cut-Off Printing, Recommended Feed Adjust Values for Cut-Off Printing
View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 2 - Set Up the Printer Note: Feed adjust values for simulator command languages like ESim, ZSim, and DSim are preset. Recommended Feed Adjust Values for Cut-Off Printing Printer PC43d PC43t Setting Start Adjust Stop Adjust Start Adjust Stop Adjust 203 dpi 300 dpi Distance -294 -434 -36.80 mm (-1.45 in) 170 251 21.3 mm (0.84 in) -372 -550 -46.60 mm (-1.45 in) 264 389 33 mm (0.84 in) Load Media for Cut-Off Printing Cut-off printing is supported only by the PC43 printer with the cutter module installed. 1 Pull one or both of the printer latches toward the front of the printer and lift the printer lid. 2 If there is an empty media core in the media compartment, remove the core. PC23 and PC43 Desktop Printer User Manual 43
Chapter 2 — Set Up the Printer
PC23 and PC43 Desktop Printer User Manual
43
Load Media for Cut-Off Printing
Cut-off printing is supported only by the PC43 printer with the cutter
module installed.
1
Pull one or both of the printer latches toward the front of the
printer and lift the printer lid.
2
If there is an empty media core in the media compartment, remove
the core.
Note:
Feed adjust values for simulator command languages like ESim,
ZSim, and DSim are preset.
Recommended Feed Adjust Values for Cut-Off Printing
Printer
Setting
203 dpi
300 dpi
Distance
PC43d
Start Adjust
-294
-434
-36.80 mm (-1.45 in)
Stop Adjust
170
251
21.3 mm (0.84 in)
PC43t
Start Adjust
-372
-550
-46.60 mm (-1.45 in)
Stop Adjust
264
389
33 mm (0.84 in)