Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 163
Media Settings, Continued
View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Appendix B - Default Settings Media Settings (Continued) Setting Description Default Media Length Sets the length of the printable area Variable measured from one edge of the label to the edge that is closest to the printhead. Unit of measurement is defined in the Unit of Measurement parameter. *935-044-001* .FEJB MFOHUI INTERMEC 6001 36th Ave W Everett WA 98203 Clip Default Start Adjust Stop Adjust Media Calibration Mode Determines if the printer prints items Off outside the printable area of the label. When this is set to Off, the printer returns an error if any part of a bar code label cannot be printed because that part extends beyond the printable area. When this is set to On, the printer prints all bar code labels, but may also print unreadable, incomplete labels. Sets the length of media the printer feeds 0 (positive value) or retracts (negative value) before printing a label. Unit of measurement is defined in the Unit of Measure parameter. Range is -9999 to +9999. Sets the length of media the printer feeds 0 (positive value) or retracts (negative value) after printing a label. Unit of measurement is defined in the Unit of Measure parameter. Range is -9999 to +9999. Selects the mode the printer uses to Fast calibrate media. Use Slow if the printer has trouble identifying gaps or marks in media. PC23 and PC43 Desktop Printer User Manual 149