Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 52
Load Media for Tear-Off Printing, printer and lift the printer lid.
View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 2 - Set Up the Printer Load Media for Tear-Off Printing Depending on the type of media you use, you may also need to install a printer accessory. If you need to print on tag media, Intermec recommends installing the optional thick media springs before printing. If you need to print on linerless media, you must install the linerless media roller accessory before printing. Note: When removing printed labels on linerless media, tear the label up towards the top of the printer to prevent media jams. 1 Pull one or both of the printer latches toward the front of the printer and lift the printer lid. 2 If there is an empty media core in the media compartment, remove the core. 38 PC23 and PC43 Desktop Printer User Manual
Chapter 2 — Set Up the Printer
38
PC23 and PC43 Desktop Printer User Manual
Load Media for Tear-Off Printing
Depending on the type of media you use, you may also need to install
a printer accessory. If you need to print on tag media, Intermec
recommends installing the optional thick media springs before
printing. If you need to print on linerless media, you must install the
linerless media roller accessory before printing.
1
Pull one or both of the printer latches toward the front of the
printer and lift the printer lid.
2
If there is an empty media core in the media compartment, remove
the core.
Note:
When removing printed labels on linerless media, tear the label
up towards the top of the printer to prevent media jams.