Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 164
Print Quality Settings, Settings > Printing > Print, Quality, Con Printing >
View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Appendix B - Default Settings Media Settings (Continued) Setting Description Default Length (Slow Mode) LTS Sensitivity Level If Media Calibration Mode is set to Slow, 0 the printer prints the media length plus 10 mm. This value sets an additional amount of media to be printed. Unit of measurement is defined in the Unit of Measurement parameter. Range is 0 to 3200. Sets the sensitivity of the label taken sensor. 0 Range is 0 to 14. Supported when the Cutter or Label Dispenser accessories are installed. Print Quality Settings This section describes print quality settings. To view these settings: • From the printer Main Menu, select Settings > Printing > Print Quality. • From the printer web page, click the Configure tab, Printing > Print Quality. Print Quality Settings Setting Print Speed Media Sensitivity Darkness Contrast Description Default Sets how fast the printer prints labels. The 100 unit of measure is defined in the Unit of Measure parameter. Sets the level of sensitivity of the media to the Variable printhead heat for media and ribbon. Sets the image darkness for media and ribbon. Variable Adjust this parameter with the Media Sensitivity parameter. Range is 1 to 100. Adjusts the blackness of the printing on the +0% label in 2% increments from -10% to +10%. 150 PC23 and PC43 Desktop Printer User Manual