Intermec PC43d PC23 and PC43 Desktop Printer User Manual - Page 61
Settings > Printing > Cutter, Automatic, A Save Changes? message appears.
View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 2 - Set Up the Printer 5 Thread the media into the slot in the cutter accessory and out through the front of the cutter. 6 Close the printer lid until it snaps shut. 7 Turn the printer on and configure the cutter: • If you have an icon printer, use PrintSet 5 to configure the cutter. • If you have an LCD printer, continue with the next step. 8 After the printer finishes starting up, press . 9 Select Settings > Printing > Cutter. 10 In the Cutter Control options, select Automatic. 11 Press or . A "Save Changes?" message appears. 12 Press to save your changes and exit the Settings menu. 13 Configure the feed adjust settings. PC23 and PC43 Desktop Printer User Manual 47
Chapter 2 — Set Up the Printer
PC23 and PC43 Desktop Printer User Manual
47
5
Thread the media into the slot in the cutter accessory and out
through the front of the cutter.
6
Close the printer lid until it snaps shut.
7
Turn the printer on and configure the cutter:
•
If you have an icon printer, use PrintSet 5 to configure the
cutter.
•
If you have an LCD printer, continue with the next step.
8
After the printer finishes starting up, press
9
Select
Settings > Printing > Cutter
.
10
In the Cutter Control options, select
Automatic
.
11
Press
or
. A “Save Changes?” message appears.
12
Press
to save your changes and exit the Settings menu.
13
Configure the feed adjust settings.