Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 119

Tickets With Black Mark Mark Stock, LSS Detection Position c, Black Mark Width d

Get Intermec PD41 PDF manuals and user guides View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 119 highlights

Appendix A - Specifications Tickets With Black Mark (Mark Stock) Media Width (a) Measurement Maximum Minimum Value 118 mm (4.65 in) 25.0 mm (1.00 in) Copy Length (b) Measurement Fingerprint IPL 8 dots/mm (203 dpi) Maximum Minimum 11.81 dots/mm (300 dpi) Maximum Minimum 1270 mm (50 in)* 6.0 mm (0.2 in) 558.8 mm (22 in)* 6.0 mm (0.2 in) 600 mm (23 in) 6.0 mm (0.2 in) 406.4 mm (16 in) 6.0 mm (0.2 in) * The print length is limited by memory constraints ESim 600 mm (23 in) 6.0 mm (0.2 in) 406.4 mm (16 in) 6.0 mm (0.2 in) LSS Detection Position (c) Variable from 0 to 57 mm (0 to 2.24 in). Black Mark Width (d) The detectable width of the black mark should be at least 5.0 mm (0.2 in) on either side of the LSS detection point. Black Mark Length (e) Measurement Maximum Common Minimum Value 25.0 mm (0.98 in) 5.0 mm (0.2 in) 3.0 mm (0.12 in) Black Mark Y-Position (f) Intermec recommends that you place the black mark as close to the front edge of the ticket as possible and use a negative Stop Adjust value to control the media feed, so the tickets can be properly torn off. PD41 and PD42 Commercial Printer User's Manual 105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
Appendix A — Specifications
PD41 and PD42 Commercial Printer User’s Manual
105
Tickets With Black Mark (Mark Stock)
* The print length is limited by memory constraints
LSS Detection Position (c)
Variable from 0 to 57 mm (0 to 2.24 in).
Black Mark Width (d)
The detectable width of the black mark should be at least 5.0 mm
(0.2 in) on either side of the LSS detection point.
Black Mark Y-Position (f)
Intermec recommends that you place the black mark as close to the
front edge of the ticket as possible and use a negative Stop Adjust
value to control the media feed, so the tickets can be properly torn off.
Media Width (a)
Measurement
Value
Maximum
118 mm (4.65 in)
Minimum
25.0 mm (1.00 in)
Copy Length (b)
Measurement
Fingerprint
IPL
ESim
8 dots/mm (203 dpi)
Maximum
1270 mm (50 in)*
600 mm (23 in)
600 mm (23 in)
Minimum
6.0 mm (0.2 in)
6.0 mm (0.2 in)
6.0 mm (0.2 in)
11.81 dots/mm (300 dpi)
Maximum
558.8 mm (22 in)*
406.4 mm (16 in)
406.4 mm (16 in)
Minimum
6.0 mm (0.2 in)
6.0 mm (0.2 in)
6.0 mm (0.2 in)
Black Mark Length (e)
Measurement
Value
Maximum
25.0 mm (0.98 in)
Common
5.0 mm (0.2 in)
Minimum
3.0 mm (0.12 in)