Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 66
Configuring the Network Type, Configuring Avalanche Settings, Network Admin, Network Type, Ethernet
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 3 - Configuring the Printer Understanding the TCP/IP Settings (continued) Setting Name Resolution Printer Service Description DNS Server: The IP address of the name server. DNSv6 Server: The IP address of the name server for IPv6. WINS Server (Primary and Secondary): The IP addresses of the primary and secondary WINS servers. If you chose DHCP or BOOTP for the configuration method, you may see the currently assigned WINS IP addresses depending on the configuration of your DHCP server. NET1 TCP Port Number: The port number for raw TCP. The default is 9100. NET1 Queuing: Determines whether queuing for the TCP port is turned on, off, or enabled for multiple network connections (Multi). Configuring the Network Type Use the Network Type page to choose whether you are using an Ethernet or wireless 802.11 network. To configure the network type 1 Click Network Admin > Network Type. 2 Select either Ethernet or Wireless 802.11. 3 Click Submit new settings. 4 Reboot the printer for the changes to take effect. Note: Once you change the network type to Wireless 802.11, you cannot communicate with the printer using Ethernet. You need to change the command through the Setup menu or send a command through a serial connection. Configuring Avalanche Settings Use the Avalanche page to view and change Wavelink Avalanche settings. To configure Avalanche settings 1 Click Network Admin > Avalanche. 2 View or update your settings. 52 PD41 and PD42 Commercial Printer User's Manual