Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 49
Connecting Peripherals to the USB Host Port
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 - Connecting the Printer • Send the following command to set ACQUIRE_PAC to on: setup "8021x","ACQUIRE_PAC","ON" 6 If you are using certificates for validation, here are some commands you may need to use. • Send the following commands to set a certificate and enable validation: setup "8021x","CA_CERT","c:/test.pfx@export" setup "8021x","VALIDATE","ON" where c:/test.pfx is the location and name of the certificate and export is the passphrase. • Send the following commands to set a common name for server 1 and server 2: setup "8021x",".SERVER_CN1","xxxxxxxxxx" setup "8021x",".SERVER_CN2","xxxxxxxxxx" where xxxxxxxxxx can be a value from 0 to 64 characters. • Send the following command to make sure your values match those used by the access point: setup write "8021x","uart1:" • You may need to send the following command several times for the wireless station to connect: setup "wlan","ACTIVE","1" Connecting Peripherals to the USB Host Port You can connect these peripheral devices to the USB host interface port on the printer: • USB mass storage device • Keyboard • Bar code scanner • USB hub PD41 and PD42 Commercial Printer User's Manual 35