Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 98
quarter of a turn, If you are using thermal transfer ribbon, load it.
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer 4 Carefully turn both screws, at the front of the printhead, clockwise a quarter of a turn at a time. Note: Be sure you make identical adjustments on both screws. If you are unsure, tighten both screws completely by turning them counterclockwise as far as they will go, and then start over. 5 Close the printhead and using the slotted screwdriver to turn the two screws at the top of the printhead bracket clockwise a single turn. 6 If you are using thermal transfer ribbon, load it. 7 Test and readjust if necessary. 84 PD41 and PD42 Commercial Printer User's Manual
Chapter 4 — Troubleshooting and Maintaining the Printer
84
PD41 and PD42 Commercial Printer User’s Manual
4
Carefully turn both screws, at the front of the printhead, clockwise
a
quarter of a turn
at a time.
5
Close the printhead and using the slotted screwdriver to turn the
two screws at the top of the printhead bracket clockwise a single
turn.
6
If you are using thermal transfer ribbon, load it.
7
Test and readjust if necessary.
Note:
Be sure you make identical adjustments on both screws. If you
are unsure, tighten both screws completely by turning them
counterclockwise as far as they will go, and then start over.