Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 68

Chapter 3 - Configuring the Printer Understanding the Wireless LAN Settings (continued) Setting Active WEP key Authentication WPA WPA Pre-shared key WPA2 Roaming setting Current channel AP MAC Address Signal strength Speed Region Description Chooses the active WEP key. Sets the type of authentication for you use for WEP keys. You can choose between Auto, Open System, and Shared. Sets the Wi-Fi Protected Access (WPA) to either on or off. Sets the WPA Pre-shared key. Sets the Wi-Fi-Protected Access version 2 to either on or off. Sets the roaming reluctancy to 1, 2 or 3. Setting the roaming reluctancy to 0 turns off the roaming feature. Shows the current channel the printer is using. (Read only) MAC address of the access point to which the printer is connected. (Read only) Radio signal strength of the access point. (Read only) Speed of the current connection. (Read only) Shows the country short names provided by the 802.11d standard for the currently selected region or country. Configuring 802.1x Settings You only see the 802.1x settings page if you have the optional wireless interface installed in your printer. Use the 802.1x page to view and change 802.1x security settings. To configure 802.1x settings 1 Click Network Admin > 802.1x. 2 View or update your settings. 3 Click Submit 802.1x settings. 54 PD41 and PD42 Commercial Printer User's Manual