Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 18
Configuring the, Printer From the Home on Printer Using PrintSet
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 1 - Using the Printer The PD41 printer always starts up using the Fingerprint printer language because it does not have a screen to select the command language. You will need to use the printer home page or PrintSet to choose a printer command language. For help, see "Configuring the Printer From the Home Page" on page 42 or "Configuring the Printer Using PrintSet" on page 56. The language you select automatically runs each time you turn on your printer. The printer language you choose affects the functionality of the printer and how you interact with it. Printer Command Language Descriptions Command Language Fingerprint IPL ZSim DSim ESim Description Intermec Fingerprint is a BASIC-inspired programming language that lets you design label formats and write custom printer application software. Intermec Printer Language (IPL) is an easy-to-use programming language that lets you design, download, and modify formats. ZSim is a Zebra™ interpreter program that interprets ZPL II or later programs. To set up, configure, and use ZSim, see the ZSim User's Guide. DSim is a Datamax™ simulation program that runs Datamax programs. To set up, configure, and use DSim, see the DSim User's Guide. ESim is a built-in protocol for use with Intermec bar code label printer. To set up, configure, and use ESim, see the ESim Programmer's Reference Manual. To select the printer command language on the PD42 printer • Press the soft key that corresponds to the printer language you want to run on your printer. 4 PD41 and PD42 Commercial Printer User's Manual