JVC DLA-X550R Instruction Manual - Page 47
Aspect, Progressive, 3D Setting, Picture Position Horiz./Vert., HDMI2 EDID, Adjust/Set
View all JVC DLA-X550R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Aspect The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that has been input. Æ "Adjusting the Screen Size (Aspect)" (P. 27) Progressive For setting the interpolation method for the interlaced signals. If the image outline is unnatural, set this item to "Off". Auto Off Setting Description Performs interpolation by automatically detecting whether the interlaced signals are converted from 24p video images, such as those in film movies, or interlaced signals of video materials. Interpolates video images as interlaced signals of video materials, etc. Mask For hiding the peripheral area of the image with a mask (black strip). Off Setting Description Off Not masked. Custom 1 to Custom 3 Masks about 0 to 220 pixels of the four sides of the image. * The pixel count is 1920 pixels in the horizontal direction and 1080 pixels in the vertical direction. On Adjust/Set Mask: black strip around the periphery 3D Setting For setting 3D movies for viewing. Æ "Viewing 3D Movies" (P. 28) Picture Position (Horiz./Vert.) Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical synchronization signals. * Adjustment cannot be made during 4K, 3D and 1080i signal input. HDMI2 EDID For changing the EDID mode of the [HDMI 2] terminal. Set to "A" under normal condition. Images with resolution 1920x1080 or lower may not be displayed when some old devices are used. In that case, connect to the [HDMI 2] terminal and set "HDMI2 EDID" to "B". * EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged between devices. 47