JVC DLA-X550R Instruction Manual - Page 56
Information, Remote Code, Lamp Reset, Adjust/Set - firmware
View all JVC DLA-X550R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Remote Code For changing the remote control code. 0 You need to configure the remote control according to the settings of this unit. On the remote control unit, press the [MENU] and [BACK] buttons at the same time for three seconds or longer to switch the code. 0 The backlight of the remote control blinks 3 times: change the remote control code to "A" 0 The backlight of the remote control blinks 2 times: change the remote control code to "B" Setting A B Description Change the remote control code from "B" to "A". Change the remote control code from "A" to "B". Lamp Reset For resetting the lamp time to "0". Æ "Resetting the Lamp Time" (P. 59) Information Setting Description Input Displays video input terminal. Source Displays the input source. (Displayed only during video signal input) Resolution Displays the image resolution. (Displayed only during PC signal input) H Frequency Displays the horizontal frequency. (Displayed only during PC signal input) V Frequency Displays the vertical frequency. (Displayed only during PC signal input) Deep Color Displays the color bit depth of the input video signal. 0 Not displayed when YCbCr (4:2:2) is input. 0 Displayed when Deep Color information is received from the source device. Color Space Displays the color space of the input signal. Lamp Time Displays the lamp time. Soft Ver. Displays the firmware version. PS Ver. Displays the version of image quality data. Adjust/Set 56