JVC DLA-X550R Instruction Manual - Page 64
Striped patterns appear on the screen, Video images are missing, Remote control does not work - 3d d ila projector
View all JVC DLA-X550R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Striped patterns appear on the screen Check Does the fabric of the screen have a regular pattern? Action Interference fringes may sometimes occur between the fabric pattern and the pixels. Please consult the authorized dealer. Refer to - Video images are missing Check Has screen mask been configured? Is the display position misaligned? Action Refer to Set "Mask" to "Off". P. 47 Alter the "Picture Position" value so that the entire image P. 47 appears on the screen. Remote control does not work Check Action Refer to Are the batteries correctly loaded? Match the polarities (t s) correctly when loading the batteries. P. 14 Are the batteries exhausted? Replace with new batteries. P. 14 Is there an obstructing object between Remove any obstructing object. the remote control and remote sensor? P. 14 Is the remote control held too far away Hold the remote control closer to the sensor during use. P. 14 from the unit? Are the IR (infrared) 3D GLASSES and As there is a possibility of signal interference, when you are P. 28 3D SYNCHRO EMITTER in use? using the IR (infrared) 3D GLASSES together with the 3D SYNCHRO EMITTER, try adjusting the orientation of the 3D SYNCHRO EMITTER. The lens cover does not close 4 5 Check Is "Lens Cover" set to "Open"? Action Refer to Set "Lens Cover" under "Lens Control" in the setting menu P. 48 to "Auto". Troubleshooting Noise is heard Check Is the exhaust vent blocked? Is the unit used near a heater or airconditioner? Are you viewing 3D video images? Is the "Picture Mode" or "Color Profile" changed? 4 5 only Did you change the "4K e-shift" setting for "MPC Level"? Action Refer to Check the installation condition of the projector. P. 15 When the surrounding temperature of the projector is high, the fan revolution speed increases to protect the projector unit, hence a louder operating sound. "Lamp Power" is set automatically to "High" to ease viewing P. 43 of 3D video images, hence a louder fan operating sound. If you are bothered by the sound, set it to "Low". Operating sound is generated by the cinema filter. This is - not a malfunction. Switching sound is generated. This is not a malfunction. - There are small black or colored dots on the screen The D-ILA device is manufactured using high-precision technologies, but there may be some (less than 0.01%) missing pixels or pixels that remain permanently lit. This is not a malfunction. 64