Kenmore 5044 Use and Care Guide - Page 19
Door Features
View all Kenmore 5044 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
DOOR FEATURES Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word "Accessory." Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the "Accessories" section. • Turn the control clockwise (right) to reduce the flow of cold air to the bin and make it less cold. • Turn the control counterclockwise (left) to increase the flow of cold air to the bin and make it colder. Style 2: T ©o@" Bn (ot some s_'_ode@ To Remove and Replace the Bin: 1. Remove the bin by pulling out on the tabs behind the basket to release it from the door liner. 2. Replace the bin by aligning the tabs with the buttons on the sides of the door liner. Firmly snap the tabs onto the buttons as shown. A_,-- A. Chilled door bin control • Slide the control to the left to reduce the flow of cold air to the bin and make it less cold. • Slide the control to the right to increase the flow of cold air to the bin and make it colder. ¢ 3}&S_e' r% 2 ,,_)e. Chd ©oo Bn (ot some mode@ Cool air from the freezer is directed to the door bin directly beneath the vent. NOTE: The dairy compartment and can rack are not chilled. The door rails or bins may be removed for easier cleaning. Snap-On Door Rails or Bins To Remove and Replace the Rails or Bins: 1. Remove the rails or bins by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the rail or bin. 2. Replace the rails or bins by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket onto the tabs above the shelf as shown. Chilled Door Bin Control The chilled door bin control is located on the left-hand side of the refrigerator compartment. Style 1: Drop-In Door Rails To Remove and Replace the Rails: 1. Remove the rails by pulling straight up on each end of the rail. 2. Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops. 19