Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 305
Finisher Tray Full], Hole-Punch Scrap Box - replacing staples
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
14.6 Managing the machine via SNMP 14 2 To notify of the machine status using SNMP TRAP function, select in the administrator mode [Mainte- nance] - [Status Notification Setting] - [IP Address] or [IPX Address] - [Edit], then configure the following settings. Settings [Notification Address] [Port Number] [Node Address] [Community Name] [Replenish Paper Tray] [JAM] [PM Call] [Replace Staples] [Replenish Toner] [Finisher Tray Full] [Service Call] [Job Finished] [Hole-Punch Scrap Box Full] [Waste Toner Box Full] [Imaging Unit Yield] Description Specify the address to be notified of the machine status. • If [IP Address] is used as the destination, enter the IP address (IPv4), IP address (IPv6), or host name (using up to 253 characters). • If the destination is an [IPX Address], enter the address by an 8-digit hexadecimal number. If the destination is an [IP Address], change the port number if necessary. Normally, you can use the original port number. If the destination is an [IPX Address], enter the node address by an 12-digit hexadecimal number. Enter the community name (using up to 15 characters). Select this check box to send a notification when paper on tray runs out. Select this check box to send a notification when paper jam occurs. Select this check box to send a notification when periodic inspection is required. Select this check box to send a notification when staples run out. Select this check box to send a notification when toner runs out. Select this check box to send a notification when the finisher tray is full. Select this check box to send a notification when a service call occurs. Select this check box to send a notification when a job is completed. Select this check box to send a notification when hole-punch scrap must be removed. Select this check box to send a notification when the waste toner box must be replaced. Select this check box to send a notification when the imaging unit must be replaced. bizhub C754/C654 14-25