Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 395
[Enable IPsec], [Communication Check]
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
17 Settings [Protocol Identification Setting] [Port Specification Method] Description Select a protocol used for IPsec communication. [Do Not Set] is specified by default. If [TCP] or [UDP] has been selected in [Protocol Identification Setting], specify the port number used for IPsec communication. Tips - To check the registered protocol settings, select a group name, then press [Mode Check]. [Enable IPsec] To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPsec Settings] - [Enable IPsec] Configure settings to enable use of IPsec on this machine. Also, specify the policy for IPsec communication. In [IPsec Settings], register items [IKE Settings], [IPsec SA Settings], [Peer], and [Protocol Setting]. Settings [ON]/[OFF] [IPsec Policy] [ON]/[OFF] [Group Name] [action] [Select Group] [Communication Type] [Common Settings] Description Select whether to use IPsec. [OFF] is specified by default. Configure the policy to apply for IPsec communication. IP packet conditions can be specified to pass or allow the IP packets that meet each of the conditions. Select a group, then press [Edit]. Select whether to use the IPsec policy. [OFF] is specified by default. Enter a name for the IPsec policy (using up to 10 characters). Select an action to be taken for the IP packets that meet [Peer], [Protocol], and [IPsec Settings]. • [Protected]: Protect the IP packets that met the conditions. • [Allow]: Do not protect the IP packets that met the conditions. • [Deny]: Discard the IP packets that met the conditions. • [Refuse]: Refuse the IP packets that met the conditions. Select [Peer], [Protocol], and [IPsec Setting] from the registered settings. Select a direction of IPsec communication. Configure common settings for IPsec policy. • [Cookies]: Select whether to enable the defense using Cookies against denial-of-service attacks. [Invalid] is specified by default. • [ICMP Pass Settings]: Select whether to apply IPsec to the Internet Control Message Protocol (ICMP). Select [Enable] to allow the ICMP packets to pass without applying IPsec to the ICMP. [Invalid] is specified by default. • [ICMPv6 Pass Settings]: Select whether to apply IPsec to the Internet Control Message Protocol for IPv6 (ICMPv6). Select [Enable] to allow the ICMPv6 packets to pass without applying IPsec to the ICMPv6. [Invalid] is specified by default. • [default action]: Select an action to be taken if no settings meet the [IPsec Policy] while IPsec communication is enabled. Select [Deny] to discard IP packets that do not meet the [IPsec Policy] settings. [Allow] is specified by default. • [Dead Peer Detection]: If no response can be confirmed from the peer within a certain period, the SA with the peer is deleted. Select a time that elapses before sending survival confirmation information to the peer how has not responded. [15] is specified by default. [Communication Check] To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPsec Settings] - [Communication Check] Select this option to confirm IPsec communication error logs. bizhub C754/C654 17-8