Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 405
[E-Mail RX (POP)]
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 405 highlights
17 Settings [Port No.] [Port Number (SSL)] [Certificate Verification Level Settings] [Detail Settings] [SMTP Authentication] [POP Before SMTP Authentication] [POP Before SMTP Time] Description If necessary, change the port number of the E-mail server (SMTP). Normally, you can use the original port number. [25] is specified by default. If necessary, change the SSL communication port number. Normally, you can use the original port number. This option is available when [SMTP over SSL] is selected for [SSL/TLS Settings]. [465] is specified by default. To validate the certificate during SSL communication, select items to be verified. • [Expiration Date]: Confirm whether the certificate is within the validity period. [Confirm] is specified by default. • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer. [Do Not Confirm] is specified by default. • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default. • [Expiration Date Confirmation]: Confirm whether the certificate has expired. [Do Not Confirm] is specified by default. • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address. [Do Not Confirm] is specified by default. Configure SMTP authentication or POP before SMTP authentication according to your environment. Select whether to use SMTP authentication. If [ON] is selected, configure the following settings. [OFF] is specified by default. • [User ID]: Enter the user ID for SMTP authentication (using up to 64 characters). • [Password]: Enter the password of the user name you entered into [Us- er ID] (using up to 64 characters). • [Domain Name]: Enter the domain name (realm) for SMTP authentica- tion (using up to 253 characters). This item is necessary when the SMTP authentication method is Digest-MD5. Enter the domain name if two or more domains (realm) exist. When only one domain (realm) exists, no entry is required. The domain name is notified from the E-mail server (SMTP) at the initial communication, and communication is automatically performed using that domain name. • [Authentication Setting]: Select whether to synchronize the SMTP authentication with the user authentication of this machine. This item is necessary when the user authentication is installed on this machine. [Use Set Value]: Uses values entered at [User ID] and [Password]. [Use User Auth. ID and Password]: Uses the user name and password of the registered user of this machine as [User ID] and [Password] for the SMTP authentication. [Use Set Value] is specified by default. Select whether to use POP before SMTP. Configure the setting if your environment requires the POP Before SMTP Authentication for sending an E-mail. [OFF] is specified by default. If necessary, change the waiting time until starting E-mail transmission after the POP authentication is successful. [5 sec.] is specified by default. [E-Mail RX (POP)] To display: [Utility] - [Administrator Settings] - [Network Settings] - [E-Mail Settings] - [E-Mail RX (POP)] Configure the settings to enable this machine to receive an E-mail. Settings [ON]/[OFF] Description Select whether to enable this machine to receive E-mails. [ON] is specified by default. bizhub C754/C654 17-18