Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 407
[SNMP Settings]
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 407 highlights
17 Settings [Digital Signature] [E-Mail Text Encryption Method] [Print S/MIME Information] [Automatically Obtain Certificates] [Certificate Verification Level Settings] [Digital Signature Type] Description To add digital signature when sending E-mails, select a method to add it. • [Do not add signature]: Does not add the signature. • [Always add signature]: Always adds the signature. The digital signa- ture is automatically added without performing special setting before sending an E-mail. • [Select when sending]: The user must select whether to add digital signature before sending an E-mail. [Do not add signature] is specified by default. Select the method to encrypt the E-mail text. [3DES] is specified by default. Select whether to print S/MIME information when this machine receives an S/MIME E-mail. [NO] is specified by default. Select whether to automatically obtain certificate from the received E-mail. The obtained certificate is additionally registered in the E-mail address that matches the E-mail address described in the certificate. [NO] is specified by default. When verifying the obtained certificate while [Automatically Obtain Certificates] is set to [Yes], select an item to be verified. • [Expiration Date]: Confirm whether the certificate is within the validity period. [Confirm] is specified by default. • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer. [Do Not Confirm] is specified by default. • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default. • [Expiration Date Confirmation]: Confirm whether the certificate has expired. [Do Not Confirm] is specified by default. To add a digital signature when sending E-mails, select its authentication method. [SHA-1] is specified by default. [SNMP Settings] To display: [Utility] - [Administrator Settings] - [Network Settings] - [SNMP Settings] Configure the settings to obtain information of this machine or to monitor the machine using Simple Network Management Protocol (SNMP). Settings [ON]/[OFF] [SNMP v1/v2c(IP)] [SNMP v3(IP)] [SNMP v1(IPX)] [UDP Port Number] [SNMP v1/v2c Settings] Description Select whether to use SNMP. [ON] is specified by default. Select whether to use SNMP v1 or SNMP v2. [ON] is specified by default. Select whether to use SNMP v3. [ON] is specified by default. Select whether to use SNMP v1 in the IPX environment. [ON] is specified by default. If necessary, change the UDP port number. Normally, you can use the original port number. [161] is specified by default. Press [SNMP v1/v2c Settings] to configure SNMP v1 or v2c settings. • [Read Community Name Settings]: Enter a read-only community name (using up to 15 characters). [public] is specified by default. • [Write Setting]: Select whether to enable the read and write functions. [Enable] is specified by default. • [Write Community Name Settings]: If [Write Setting] is set to [Enable], enter the community name in the read-write enable state (using up to 15 characters). [private] is specified by default. bizhub C754/C654 17-20