Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 70
Reference, OCSP Online Certificate Status Protocol service
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
7.1 Configuring the Scan to E-mail environment 7 3 Set the POP over SSL and APOP settings according to your environment. In the administrator mode, select [Network] - [E-mail Setting] - [E-mail RX (POP)], and configure the following settings. Settings [APOP Authentication] [Use SSL/TLS] [Port No. (SSL)] [Certificate Verification Level Settings] [Validity Period] [CN] [Key Usage] [Chain] [Expiration Date Confirmation] Description If you use APOP in your E-mail server (POP), select [ON]. [OFF] is specified by default. When using SSL to encrypt a communication with the E-mail server (POP), select this check box. [OFF] (not selected) is specified by default. If necessary, change the SSL communication port number. Normally, you can use the original port number. [995] is specified by default. To verify the certificate, select items to be verified. If you select [Confirm] at each item, the certificate is verified for each item. Confirm whether the certificate is still valid. [Confirm] is specified by default. Confirm whether CN (Common Name) of the certificate matches the server address. [Do Not Confirm] is specified by default. Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer. [Do Not Confirm] is specified by default. Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default. Confirm whether the certificate has expired. Confirm for expiration of the certificate in the following order. • OCSP (Online Certificate Status Protocol) service • CRL (Certificate Revocation List) [Do Not Confirm] is specified by default. d Reference In the administrator mode, select [Security] - [Certificate Verification Settings], then configure whether to ver- ify the certificate. The certificate is verified by default. For details, refer to page 13-9. bizhub C754/C654 7-10