Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 399
[FTP TX Settings]
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
17 Settings [FTP Server Settings] Description Configure settings to enable use of the FTP server function of this machine. Also, configure security settings to use this machine as an FTP server. [FTP TX Settings] To display: [Utility] - [Administrator Settings] - [Network Settings] - [FTP Settings] - [FTP TX Settings] Configure settings to enable use of the FTP transmission function on this machine. Settings [ON]/[OFF] [Proxy Server Address] [Proxy Server Port Number] [Port No.] [Connection Timeout] Description Select whether to use the FTP transmission function of this machine. Selecting this option sends the scanned original data to the FTP server. [ON] is specified by default. To access to the FTP server via a proxy server, enter the proxy server address. Use one of the following entry formats. • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" If necessary, change the proxy server port number. Normally, you can use the original port number. [21] is specified by default. If necessary, change the FTP server port number. Normally, you can use the original port number. [21] is specified by default. If necessary, change the time-out time to limit a communication with the FTP server. [60 sec.] is specified by default. [FTP Server Settings] To display: [Utility] - [Administrator Settings] - [Network Settings] - [FTP Settings] - [FTP Server Settings] Configure settings to enable use of the FTP server function of this machine. Using this machine as an FTP server allows you to associate this machine with an application that operates as an FTP client. Settings [ON]/[OFF] [Deny Reception Command] [PORT Command Enhanced Security] Description Select whether to use the FTP server function of this machine. [ON] is specified by default. Select a command to deny a receiving job from an FTP client when using the FTP server of this machine. Set this option to return an error when a PORT/EPRT command or PASV/EPSV command is sent from an FTP client to this machine. [Allow] is specified by default. Select whether to enable the security of this machine against FTP bounce attacks. This option is not available if [Deny Reception Command] is set to [PORT/EPRT]. When a PORT/EPRT command is sent from an FTP client, the data connection is established only if both of the following conditions are satisfied: • A port number less than 1024 is not specified. • The IP address specified by the command is same as that specified when a control connection is established. [Enable] is specified by default. bizhub C754/C654 17-12