Konica Minolta bizhub C654 bizhub C654/C754 Web Management Tool User Guide - Page 402
[Direct Hosting Setting], [LDAP Settings]
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
17 [Direct Hosting Setting] To display: [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Direct Hosting Setting] Select whether to enable the direct hosting SMB service. If enabled, a peer can be specified using the IP address (IPv4 or IPv6) or host name. [ON] is specified by default. [LDAP Settings] To display: [Utility] - [Administrator Settings] - [Network Settings] - [LDAP Settings] Configure the settings to search for destinations from the LDAP server or Active Directory. Settings [Enabling LDAP] [Setting Up LDAP] [LDAP Server Name] [LDAP Setting] [Server Address] [Search Base] [SSL Setting] [Port Number] [Port Number (SSL)] Description Select whether to use the LDAP server to search for a destination. Using this function allows you to search for an E-mail address or fax number via the LDAP server when sending the scanned original data. [OFF] is specified by default. Register the LDAP server used to search for a destination. Select an unregistered key, and enter the required information. Enter the name of the LDAP server (using up to 32 characters). Use a name that helps you easily identify the server. Configure settings for LDAP search operations. • [Max.Search Results]: Change the maximum number of destinations to be displayed as search results, if necessary. [100] is specified by default. • [Timeout]: Change the timeout interval for communication with the LDAP server, if required. [60 sec.] is specified by default. • [Initial Setting for Search Details]: Specify the default LDAP search conditions for each item. [OR] is specified by default in every case. • [Change Search Attribute]: Select attributes to be specified when performing the LDAP search. The setting can be switched between [Name] (cn) and [Nickname] (displayName). [Name] is specified by default in every case. • [Search]: Select whether to display candidate destinations when entering part of a name. [OFF] is specified by default. Enter the LDAP server address. Use one of the following entry formats. • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" Specify the starting point to search for a user to be authenticated (using up to 255 characters). This option also searches in subdirectories under the entered starting point. Example of entry: "cn=users,dc=example,dc=com" Specify whether or not to use SSL for communication with the LDAP server. [OFF] is specified by default. If necessary, change the LDAP server port number. Normally, you can use the original port number. [389] is specified by default. If necessary, change the SSL communication port number. Normally, you can use the original port number. [636] is specified by default. bizhub C754/C654 17-15