Kyocera KM-C2230 Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 98

44-42 Performing Setup from the Control Panel Network Setup Service Setup SNMP Setup SNMP Setup Enable SNMP Yes/No [Yes] This option enables the SNMP communication over a TCP/IP or IPX connection. Selecting No disables any access to remote Setup through Fiery WebSetup and Command WorkStation. SNMP Read Community Name [public] This option appears if you select Yes for Enable SNMP. This option allows you to change the SNMP Community Name ("public" by default) for read access. Once it is changed, the new community name must be entered to read any information through remote Setup. Up to 32 ASCII characters including spaces can be used for the community name. SNMP Write Community Name [public] This option appears if you select Yes for Enable SNMP. This option allows you to change the SNMP Community Name ("public" by default) for write access. Once it is changed, the new community name must be entered to write any information through remote Setup. Up to 32 ASCII characters including spaces can be used for the community name.