Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 140
Performing Scan to PC Operations
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Using the Scan Functions 8 8.9 Performing Scan to PC Operations The Scan to PC operation is used to send the image data scanned on this machine directly to a computer using FTP. ✎ Note An FTP server application must be installed on the computer in advance. 8.9.1 Flow of Scan Operation Procedure 1 Using Printer Management Utility, perform one-touch key registration or temporary key registration. "Registering Destinations in Advance" on page 8-25 2 Set the FTP application. "Setting the FTP Application" on page 8-54 3 Start up the FTP application on the computer. 4 Using this machine's control panel, specify the destination of the scanned data. "Setting the Destination" on page 8-54 5 Using this machine's control panel, set the scan mode and document designation. "Scan Mode Screen" on page 8-14 and "Original Setting Screen" on page 8-16 6 Set the document, and then press the [Start] key on this machine's control panel. The document is scanned. The scanned data is sent to an application that receives the data using FTP. 7 Check the scanned data on the recipient computer. ✎ Memo If the registration of the destination and the FTP application configuration are already done, perform steps 3 through 7. The transmission destination to the computer is the root folder specified by the application. The destination cannot be specified from this machine. 8-53