Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 56
Network Printing in a Windows, Environment
![]() |
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Network Printing in a Windows Environment 6 6 Network Printing in a Windows Environment 6.1 Network Connection Methods That Can Be Selected in Each Windows OS This chapter describes the settings that must be specified for network printing. Setting procedures differ depending on the method of network printing used (Windows, LPR, or IPP printing). Select the best method of network printing for your Windows environment. Network Printing from a Windows OS Protocol Used Windows 98/98SE Windows Me Windows 2000 Windows XP Windows NT 4.0 Windows Server 2003 Windows NetBEUI ❍ ❍ ❍ ❍ ❍ ❍ Printing LPR Printing TCP/IP ❍ ❍ ❍ ❍ IPP Printing TCP/IP ❍ ❍ ❍ ✎ Note To perform Windows printing, the NetBEUI protocol must be installed on your computer. Before setting up network printing, refer to the procedure described in "4 Installing the Printer Driver" and install the printer driver. To perform network printing, change the printer port for the installed printer driver to one for a network connection, and then change the settings on this machine as necessary. For an IPP connection, it is necessary to start with the step for installing the printer driver. Network Printing in a NetWare Environment NetWare Version NetWare 4.x NetWare 5.x/6 Protocol Used IPX IPX TCP/IP Emulation NDS/Bindery NDS NDPS(lpr) Service Mode PServer/NPrinter PServer 6-1
![](/manual_guide/products/kyocera-kmc2230-kmc2230-standard-pcl-print-controller-users-guide-8db9a92/56.png)