Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 203
Detail, Input Tray, Procedure
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
12 Using Printer Management Utility Detail - Input Tray You can check the status of the paper drawers for this machine. Procedure ➜ Click the "System" tab, click Detail, and then click Input Tray in the sub-menu that appeared. Input Tray Paper Size Paper Type Capacity Paper 12-8 Displays the paper drawer names. "Tray 1", "Tray 2", "Tray 3", "Tray 4", "LCT", or "Bypass" Displays the paper size that is set. The feed direction is displayed as "LEF" or "SEF". Standard paper sizes: A3, A4, A5, A6, B4, B5, B6, 11 × 17, 11 × 14, Legal, Letter, 5.5 × 8.5, Executive, A3 Wide*, postcard, 4 × 6, 8K, or 16K Non-standard paper sizes: Displayed in unit of mm * You can specify the paper size using "A3 Wide Paper Size" on the Administrator Settings page (page 12-36) in Administrator mode. Displays the paper type that is set. Plain Paper, Thick 1, Thick 2, Thick 3, Envelope, OHP, 2nd side Plain Paper, Thick 1 2nd-Side, Thick 2 2nd-Side, or Thick 3 2nd-Side In addition, if the paper properties are specified, "Plain Paper" ("Specialty", etc.) is indicated. "Single Sided Only", "High Quality Paper", or "Specialty" Displays the capacity of the paper drawer in terms of the maximum capacity for plain paper. Displays the amount of paper remaining in the paper drawer with the three levels shown below. "Ready", "Near Empty", or "Empty"