Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 199
Logging in to Administrator Mode
![]() |
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
12 Using Printer Management Utility 12.4 Logging in to Administrator Mode You can switch between User mode and Administrator mode. However, you must enter Administrator mode to specify system configurations or network configurations. Login procedure ➜ In the Administrator's Code box on the User mode page, enter the administrator password (administrator access code) of this machine, and then click the [Log-in] button. The Administrator mode page appears. To return to User mode, click the [Log-out] button. ✎ Note When logged in to Administrator mode, the control panel of this machine is locked and cannot be used. Depending on the status of this machine, you may not be able to log in to Administrator mode. When logged in to Administrator mode, if no operation is performed for a set length of time, a timeout occurs and you will automatically be logged out from Administrator mode. The timeout time is the time that is specified by the "Time (Panel Reset Timer)" item on the "Administrator Settings" page (page 12-36). If the time is set within the range of 1 to 5 minutes, the timeout time is set to 5 minutes. If "Panel Reset Timer" is set to "No", the timeout time is 10 minutes. If the unauthorized access lock is enabled on this machine's control panel and you enter a wrong administrator's code three times, the login is determined to be invalid and you will no longer be able to log in to Administrator mode. To enable access, this machine must be restarted (turned off, then on again). 12-4
![](/manual_guide/products/kyocera-kmc2230-kmc2230-standard-pcl-print-controller-users-guide-8db9a92/199.png)