Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 57
Setting the IP Address for This Machine
![]() |
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6 Network Printing in a Windows Environment 6.2 Setting the IP Address for This Machine First, use this machine's control panel to assign an IP address to this machine. ✎ Note When specifying network settings, follow the instructions of the network administrator. Setting procedure 1 Press the [Utility] key on this machine's control panel, touch [Admin. Mode], and then enter the administrator access code. 2 Touch [Network Setting], [Common Setting], then [TCP/IP]. 3 Specify settings for the following. ❍ IP Address: Set the IP address of this machine. ❍ Subnet Mask: Set the subnet mask for the network to which you are connecting. ❍ Gateway Address: Set the default gateway address for the network to which you are connecting. ✎ Note Although the IP address is entered without using the DHCP server in the procedure described here, it is also possible to automatically assign the IP address from the DHCP server. When "DHCP" is set to "Enable", the IP address, subnet mask, and gateway address settings are automatically assigned from the DHCP server on the network, so it is not necessary to assign them manually. However, note the following when setting "DHCP" to "Enable". 6-2
![](/manual_guide/products/kyocera-kmc2230-kmc2230-standard-pcl-print-controller-users-guide-8db9a92/57.png)