Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 70
Use the NetWare Server console to load MONITOR.NLM.
![]() |
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Network Printing in a Windows Environment 6 6 In Administrator mode of Printer Management Utility, from the "Network" tab, select Common Setting - NetWare Configuration, and then specify the following settings for the printer controller. ❍ Enable NetWare: Select "Enable". ❍ Frame Type: Select "Auto Detect". (Select the frame type according to the network environment.) ❍ Bindery/NDS: Select "Bindery". ❍ Print Server Name:Print server name created in step 4 ❍ Print Server Password: Specify only when setting from the NetWare Server. ❍ Preferred File Server: Name of the file server that connects to PServer ❍ Print Queue Scan Rate: 1 (Change as necessary.) ❍ Mode: PServer 7 Restart this machine (turn it off, then on again). 8 Use the NetWare Server console to load MONITOR.NLM. 9 Select the connection information and, in the active connection column, check that the created PServer is connected. 6-15
![](/manual_guide/products/kyocera-kmc2230-kmc2230-standard-pcl-print-controller-users-guide-8db9a92/70.png)