Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 291
Unable To Specify Desired Settings or Unable To, Print as Specified - print driver
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
14 Troubleshooting 14.2 Unable To Specify Desired Settings or Unable To Print as Specified Perform these troubleshooting procedures if you cannot specify the desired settings in the print driver, or if the print results do not represent the settings that have been specified. ✎ Memo Some of the printer driver functions cannot be combined with other functions. For details, refer to "Items That Cannot Be Set Simultaneously" on page 5-20. Symptom Probable Cause Action A printer driver setting cannot be selected. Some functions cannot be combined. Do not try to select settings that are dimmed. Refer to "Items That Cannot Be Set Simultaneously" on page 5-20. The Conflicts dialog An incorrect combination of Check the settings and specify box appears. functions have been specified. the functions correctly. Print is not performed Incorrect settings have been as specified. specified. Check each setting in the printer driver. A combination of functions, although possible in the printer driver, is not possible with this machine. The paper size, orientation, and other settings specified in the application have priority over those specified in the printer driver. Enter the correct settings in the application. The watermark cannot be printed. The watermark is not correctly Check the watermark settings. set. The watermark density is set to a Check the Shading setting. level that is too low. Watermarks cannot be printed in No watermark can be printed in graphics applications. this case. The staple function cannot be specified. Stapling is not possible if "Media Check each setting in the printer Type" is set to "Thick" or driver. "Transparency". 14-2