Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 186
Job Management
![]() |
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Job Management 11 11 Job Management 11.1 Print Job Management This section provides details on print job management. 11.1.1 Specifying the Job Operation You can specify the job operation on this machine by setting the printer driver. Setup procedure 1 Open the printer driver setup dialog box. (Refer to "Displaying the Printer Driver Setup Dialog Box" on page 5-1.) 2 Click the "Job Management" tab, and the select the operation to be performed after processing from the Store Job drop-down list. Delete After Printing Print and Hold Store to HDD Store to Memory Proof and Print Lock Job The job is deleted after it is printed. The job is deleted even if the reprint function is used on this machine. After printing, the job is temporarily held in the memory. The data is cleared when this machine is turned off. The job that is temporarily held in the memory can be recalled only when the reprint function is used on this machine. Refer to "Print and Hold" on page 11-2. If the optional hard disk is installed, the job is stored on the hard disk until it is deleted from this machine. Refer to "Store to HDD" on page 11-3. The job is stored in the memory until it is deleted from this machine. Refer to "Store to Memory" on page 11-4. Only a single copy of the job is printed, and the remaining copies are stored in the memory. The data is cleared if this machine is turned off. Refer to "Proof and Print" on page 11-5. The job is not printed or stored in the memory until the password specified at the time of printing is entered on this machine's control panel. The data is cleared if this machine is turned off. Refer to "Lock Job" on page 11-6. 11-1
![](/manual_guide/products/kyocera-kmc2230-kmc2230-standard-pcl-print-controller-users-guide-8db9a92/186.png)