Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 292
Symptom, Probable Cause, Action
![]() |
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Troubleshooting 14 Symptom Probable Cause Action Stapling cannot be performed. Number of pages that can be stapled when single staple finisher is installed: Up to 30 pages Change the Copies setting. Number of pages that can be stapled when folding finisher is installed: Up to 50 pages on A4/Letter or smaller paper, and up to 25 pages on B4/Legal or larger paper Number of pages that can be center-stapled when folding finisher is installed: Up to 10 pages Stapling is not possible if the document contains pages of different sizes. Check the document. The stapling position The orientation setting is not is not as expected. correct. Check the stapling position on "Page Layout" of the printer driver setup dialog box. The hole punch function cannot be specified. Hole punching cannot be specified if "Booklet", "Transparency", "Thick2", "Thick3", or "Envelope" is selected. Check each setting in the printer driver. The pages are not punched. Printed pages may be fed out without being punched if the paper is loaded into the paper source with an incorrect orientation. Check the orientation setting. The hole punch position is not as expected. The orientation setting is not correct. Check the punch position on "Page Layout" of the printer driver setup dialog box. The folding function cannot be specified. Folding finisher must be installed in order to specify the folding function. Folding finisher must be selected on the "Device Option Setting" tab. Select folding finisher on the "Device Option Setting" tab of the printer driver. Folding cannot be specified Check each setting in the printer together with stapling or "Thick". driver. The image is not printed properly. Available memory space is not Simplify the image to reduce the sufficient. data size. Paper is not fed from the specified paper source. Paper will not be fed from the specified paper source if that paper source is loaded with paper of a different size or orientation. Load the paper source with paper of the appropriate size and orientation. 14-3
![](/manual_guide/products/kyocera-kmc2230-kmc2230-standard-pcl-print-controller-users-guide-8db9a92/292.png)