Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 16
Using a Parallel Connection
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting to a Computer 3 3.2 Using a Parallel Connection Use a parallel cable (IEEE 1284, Centronics) to connect the parallel port on this machine to the parallel port on the computer. The parallel port on this machine supports IEEE 1284 Type B. ✎ Note To connect this machine to the computer using a parallel connection, the optional local interface kit is required. Always use a parallel cable that is shielded. Failure to do so may result in radio frequency interference. ✎ Memo To install the printer driver using Plug and Play, use the parallel cable to connect this machine to the computer when you install the printer driver (refer to "Installing the Printer Driver Using Plug and Play" on page 4-7). Connection procedure 1 Turn this machine and the computer off. 2 Connect one end of the parallel cable to the parallel port (printer port) on the computer. 3 Connect the other end of the parallel cable to the parallel port on the back of this machine. Use the two clips to secure the interface cable connector. This machine is now connected to the computer. 3-3