Lantronix XPort XChip - User Guide - Page 30
Connect Protocol, Connect Mode: Passive Connection, Endpoint Configuration - telnet
View all Lantronix XPort manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4: Configuration Using Web Manager 2. In the available fields, enter or modify the following information: Connect Protocol Protocol From the drop-down menu, select TCP. Connect Mode: Passive Connection Accept Incoming Required Password Select Yes to accept incoming connections. The default is Yes. Determines whether a password is required for an incoming passive connection. This field is not available when a password is set for Telnet mode. If Password Required was set to Yes, enter the password for passive connections. Connect Mode: Active Connection Active Connect Select None to disable Active Connect. Otherwise, indicate the connection type from the drop-down list: With Any Character: Attempts to connect when any character is received from the serial port. With Active Mdm Ctrl In: Accepts external connection requests only when the Modem Control In input is asserted. With Start Character: Attempts to connect when it receives a specific start character from the serial port. The default start character is carriage return. Manual Connection: Attempts to connect when directed by a command string received from the serial port. Auto Start: Automatically connects to the remote IP address and port after booting up. Start Character Modem Mode Show IP Address After Ring If Active Connect is set to With Start Character, enter the start character in this field. Indicates the on-screen response type when in Modem Mode (if Modem Mode is enabled). Indicates whether to display the remote IP address upon connection. The default setting is Yes. Endpoint Configuration Local Port Auto increment for active connect Enter the local port number. Select to auto-increment the local port number for new outgoing connections. The range of auto-incremented port numbers is 50,000 to 59,999 and loops back to the beginning when the maximum range is reached. XPort User Guide 30