Lantronix XPort XChip - User Guide - Page 40

Exiting Setup Mode, You must do this within three seconds of, resetting the XPort.

Get Lantronix XPort PDF manuals and user guides View all Lantronix XPort manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

5: Configuration via Telnet or Serial Port (Setup Mode) Note: The easiest way to enter Setup Mode is to hold down the x key at the terminal (or emulation) while resetting the unit. You must do this within three seconds of resetting the XPort. At this point, the screen display is the same as when you use a Telnet connection. To continue, go to step 4, above, in the section Telnet Connection. Exiting Setup Mode To exit setup mode: You have two options:  To save all changes and reboot the device, select option 9 Save and exit from the Change Setup menu. All values are stored in nonvolatile memory.  To exit the configuration mode without saving any changes or rebooting, select option 8 Exit without save from the Change Setup menu. XPort User Guide 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
5: Configuration via Telnet or Serial Port (Setup Mode)
Note:
The easiest way to enter Setup Mode is to hold down the
x
key at the terminal
(or emulation) while resetting the unit.
You must do this within three seconds of
resetting the XPort.
At this point, the screen display is the same as when you use a Telnet connection. To
continue, go to step 4, above, in the section
Telnet Connection
.
Exiting Setup Mode
To exit setup mode:
You have two options:
To save all changes and reboot the device, select option
9
Save and exit
from
the Change Setup menu. All values are stored in nonvolatile memory.
To exit the configuration mode without saving any changes or rebooting, select
option
8 Exit without save
from the Change Setup menu.
XPort User Guide
40