Lenovo S9e Laptop User Guide - IdeaPad S9e and S10e - Page 29
Changing, Removing, Supervisor, Password, Enter, Current, Confirm, Enabled, Password, Security
View all Lenovo S9e Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
8. Select Yes in the Setup Confirmation window. Changing or Removing the Supervisor Password To change the password, do the following: 1. Select Set Supervisor Password, and press Enter. The Set Supervisor Password window opens. 2. Select Enter Current Password and type in the correct password. Then press Enter once to move to Enter New Password field, type a new supervisor password in. 3. Press Enter once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4. Commit your password to memory, and press Enter. To remove password, do the following: 1. Select Set Supervisor Password, and press Enter. 2. Select Enter Current Password and type in the correct password, and press Enter thrice. Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. To set a User Password: 1. Turn on your computer. When the Lenovo logo and "Press to Setup" come up, immediately press F2 to enter the BIOS Setup Utility . 2. Select Security, using the cursor directional keys. 3. Select Set User Password, and press Enter. The Set User Password window opens. Chapter 2. Using your computer 21