Lenovo S9e Laptop User Guide - IdeaPad S9e and S10e - Page 30

Enter, Password, Confirm, Changing, Removing, Current, Enabled

Page 30 highlights

4. Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5. Press Enter once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6. Commit your password to memory, and press Enter. 7. Press F10 to exit. 8. Select Yes in the Setup Confirmation window. Note: You can set the User Password only when the Supervisor Password has been set. Changing or Removing the User Password To change the password, do the following: 1. Select Set User Password, and press Enter. The Set User Password window opens. 2. Type correct password in the Enter Current Password field. Then press Enter once to move to the Enter New Password field, type a new user password in. 3. Press Enter once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4. Commit your password to memory, and press Enter. To remove the password, do the following: 1. Select Set User Password, and press Enter. 2. Type correct user password in Enter Current Password, and press Enter twice. Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. 22 Lenovo® IdeaPad™ S9e and S10e User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176

4.
Choose
your
user
password,
which
can
be
from
one
to
eight
alphanumeric
characters
in
any
combination.
Type
it
in
the
Enter
New
Password
field.
5.
Press
Enter
once
to
move
to
the
Confirm
New
Password
field.
Retype
the
password
you
just
entered
to
verify
it.
6.
Commit
your
password
to
memory,
and
press
Enter
.
7.
Press
F10
to
exit.
8.
Select
Yes
in
the
Setup
Confirmation
window.
Note:
You
can
set
the
User
Password
only
when
the
Supervisor
Password
has
been
set.
Changing
or
Removing
the
User
Password
To
change
the
password,
do
the
following:
1.
Select
Set
User
Password
,
and
press
Enter
.
The
Set
User
Password
window
opens.
2.
Type
correct
password
in
the
Enter
Current
Password
field.
Then
press
Enter
once
to
move
to
the
Enter
New
Password
field,
type
a
new
user
password
in.
3.
Press
Enter
once
to
move
to
the
Confirm
New
Password
field.
Retype
the
password
you
just
entered
to
verify
it.
4.
Commit
your
password
to
memory,
and
press
Enter
.
To
remove
the
password,
do
the
following:
1.
Select
Set
User
Password
,
and
press
Enter
.
2.
Type
correct
user
password
in
Enter
Current
Password
,
and
press
Enter
twice.
Note:
Make
sure
the
Password
on
boot
is
set
to
Enabled
if
you
need
the
password
protection
at
power
on.
22
Lenovo
®
IdeaPad
S9e
and
S10e
User
Guide