Lexmark Z82 Color Jetprinter User's Guide (3.6 MB) - Page 92
Problem, Cause & Solution
View all Lexmark Z82 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Problem Cause & Solution The paper does not feed into the printer G Make sure the print media is loaded correctly. Remove and re-insert paper correctly. G There is too many sheets in the Input Tray. Remove some papers. G Do not mix paper types. The data does not print correctly G The printer cable is not connected properly. G The printer driver may be incorrectly installed. Remove the existing printer driver, and re-install it. Printing is too slow G Adjust the print quality setting. G Graphics print more slowly than text. G Color prints more slowly than black and white. G Special media prints more slowly than plain paper. G Another running application affects print speed. Close the running program if not required. 9-8 Troubleshooting 9-8
Troubleshooting
9-8
9-8
Problem
Cause & Solution
●
Make sure the print media is loaded correctly.
Remove and re-insert paper correctly.
●
There is too many sheets in the Input Tray.
Remove some papers.
●
Do not mix paper types.
The paper does not feed
into the printer
●
The printer cable is not connected properly.
●
The printer driver may be incorrectly installed.
Remove the existing printer driver, and re-install it.
The data does not print
correctly
●
Adjust the print quality setting.
●
Graphics print more slowly than text.
●
Color prints more slowly than black and white.
●
Special media prints more slowly than plain paper.
●
Another running application affects print speed.
Close the running program if not required.
Printing is too slow