NEC NP-M300X M260W : user's manual - Page 122
To replace the filters, Push the catch to release the filter unit and pull it out.
UPC - 805736035629
View all NEC NP-M300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
To replace the filters: Four filters are packaged with the replacement lamp. Honeycomb filter (coarse mesh): Large and small sizes (attached to the filter unit) Accordion filter (fine mesh): Large and small sizes (attached to the filter cover) 7. Maintenance NOTE: • Replace all four filters at the same time. • Before replacing the filters, wipe off dust and dirt from the projector cabinet. • The projector is precision equipment. Keep out dust and dirt during filter replacement. • Do not wash the filters with soap and water. Soap and water will damage the filter membrane. • Put filters into place. Incorrect attachment of a filter may cause dust and dirt to get into the inside of the projector. Before replacing the filters, replace the lamp. (→ page 109) 1. Push the catch to release the filter unit and pull it out. WIRELESS 2. Detach the filter cover from the filter unit. The filter cover is fixed at six separate mounting points. Bow the filter cover by pushing it slightly until it releases. Notch Filter unit WIRELESS Filter cover 112