Netgear DGND3300v2 DGND3300 User Manual - Page 101
Setting Up the Base Station, Wireless Repeating, Function, Enable Wireless Repeating Function
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual If this check box is selected, the modem router communicates wirelessly only with other APs whose MAC addresses are listed in this screen. The modem router still communicates with wire-connected LAN devices. Setting Up the Base Station The wireless repeating function works only in hub and spoke mode. The units cannot be daisy chained. You must know the wireless settings for both units. You must know the MAC address of the remote unit. First, set up the base station, and then set up the repeater. To set up the base station: 1. Set up both units with exactly the same wireless settings (SSID, mode, channel, and security). Note that the wireless security option must be set to None or WEP. 2. Log into the modem router base unit, under the Advanced heading, select Wireless Repeating Function to display the Wireless Repeating Function screen. Figure 6-14 3. Select the Enable Wireless Repeating Function check box and the Wireless Base Station radio button. 4. Enter the MAC address for the repeater units. 5. Click Apply to save your changes. 6-18 Customizing Your Network Settings v1.0, September 2009