Netgear DGND3300v2 DGND3300 User Manual - Page 39
Enable Guest Network, Guest Wireless Network Name,
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 2-2. Wireless Modes and Guest Networks (continued) Mode in Wireless Settings Screen Up to 130Mbps at 5GHz & 54Mbps at 2.4GHz Up to 130 Mbps at 2.4GHz Menu Selection Guest Network a/n Guest Network b/g Guest Network a/n Guest Network Default SSID Wireless Compatibility NETGEAR-2.4G_n_Guest1 NETGEAR-2.4G_g_Guest1 NETGEAR-2.4G_n_Guest1 • 5GHz 802.11a • 5GHz 802.11n • 2.4GHz 802.11g • 2.4GHz 802.11b • 2.4GHz 802.11n • 2.4GHz 802.11g • 2.4GHz 802.11b To configure a wireless guest network: 1. In the main menu, under Setup, select either Wireless Guest Network g/b or Wireless Guest Network a, n. A Wireless Guest Network Settings screen similar to the following figure displays: Figure 2-9 2. Make sure that the Enable Guest Network check box is selected. 3. You can specify whether the SSID broadcast is enabled, and whether you want to allow the guest to access your local network. You can also change the Guest Wireless Network Name (SSID), enter a name in the field. Note: NETGEAR strongly recommends that you change the default guest network name (SSID) from the default name to a different name. Note that the name is case-sensitive. For example, GuestNetwork is not the same as Guestnetwork. 2-18 v1.0, September 2009 Safeguarding Your Network